Ballasts
RSS SIGN BALLAST RSS496AT* 120V
About Product
| No of Lamps | Lamps Circuit | Per Circuit Footage | Combined Total Footage | Catalog # | ||||||||
| 2 to 4 |
Circuit I (lamps 1,2)
Circuit II (lamps 2,4)
|
|
|
RSS496AT** | ||||||||
| Imput Voltage | Max Imput Amps | Max Imput Watts | Open Circuit Voltage | Wiring Diagram | ||||||||
| 120v | 3.20 | 370 | 950 | 3,5 |
Direct replacement for ferromagnetic ballast (NO REWIRING REQUIRED)
3 RSS BALLASTS replace 15 existing models
For use with TO and T12 HO lamps (2" to 10" in Length)
New Smaller Profile allos for greater adaptability for low profile signage menu board application
Quite Operation in all installation conditions
Conventional series wiring
Cold Weather start at 20 F (-30 C )
Meets FCC rating, Low RFI and EMI ensures
Meets ANSI C82.11 Standards
Less than 8% THD for installation confidence
Thermal Protection
Increased lamp life
3 RSS BALLASTS replace 15 existing models
For use with TO and T12 HO lamps (2" to 10" in Length)
New Smaller Profile allos for greater adaptability for low profile signage menu board application
Quite Operation in all installation conditions
Conventional series wiring
Cold Weather start at 20 F (-30 C )
Meets FCC rating, Low RFI and EMI ensures
Meets ANSI C82.11 Standards
Less than 8% THD for installation confidence
Thermal Protection
Increased lamp life
Produtct info
Specifications:
BALLAST CROSS REFERENCE
VISIT OUR LOCATION:
10531 Dale Ave. Stanton, CA 90680
TEL::
(888) 313 - 9090
Leave a Comment