LED Light Controllers

HM-12RGB10A3-RC-3

  • RC3-COMPLETE.jpg

About Product

From the day you purchase our products within a year, if being used properly

in accordance with the instruction, and quality problems occur, we provide free
repair or replacement services except the following cases:
1.Any defects caused by wrong operations:
2.Any damages caused by unauthorized removal, maintenance, modifying
circuit, incorrect connections and replacing chips.
3.Any damages due to transportation, breaking, flooding water after the
purchase.
4.Any damages caused by earthquake, fire, flood, lightning strike etc force
majored of natural disasters.
5 . Any damages caused by negligence, inappropriate storing at high
temperature and humidity environment or near harmful chemicals.
6.Product has been updated.

SAFETY INSTRUCTIONS
In order to ensure the integrity of the state and use of safe, please follow the
instructions on this manual and remind:
1. Please avoid installation at the minefields, strong magnetic field and
high-pressure region.
2. Make sure the wiring is correctly and securely, to avoid short-circuit
damage components and trigger the fire accident.
3. Set the controller installed in a well-ventilated place, in order to ensure a
suitable ambient temperature.
4. Before using this product, check the DC power supply meets the product
requirements, the power of positive and negative whether the definition and
product.
5.Don’t wiring with power.
6.If a problem occurs, do not maintenance privately. If you have any questions,
please contact the supplier.

FEATURES:
● RF and Membrane switch.
● 3-channel output, the maximum output current of 10A per channel
● High-speed microcontroller to process the data, no delay, no flicker
● 8 level brightness adjustment, 8 level speed adjustment, convenient and
practical
● 29 built in modes to select
● DC5-24V input
● With power off memory

TECHNICAL PARAMETERS

INPUT VOLTAGE: DC 5-24V
SIGNAL OUTPUT: RGB 3 CHANNEL SIGNAL
MAX LOAD CURRENT 10A 3 CHANNEL
OUTPUT POWER 360W max (12v) 720W max 24v

The remote control use a 23A 12V battery. We do not supply batteries for transportation and other reasons.

Produtct info

VISIT OUR LOCATION: 10531 Dale Ave. Stanton, CA 90680

Leave a Comment